Instrument UT-202 T STRUJNA KLIJEŠTA 600 A AC/DC, Uni-trend

Opis

The UT202T is an easy-to-use smart clamp multimeter that can automatically detect most common parameters - AC/DC voltage, AC current, resistance and line continuity. Displays true rms values.
Capacitance measurement and non-contact voltage measurement (NCV) are selected by pressing buttons. The UT202T has a novel design, high reliability and safety, as well as automatic range change available for all functions. Backlit dual LCD display with a maximum display value of ±9999 can simultaneously display voltage/current, voltage/frequency, current/frequency. There is an LED lamp on the underside of the clamping jaws. It is powered by two AAA 1.5V R03 batteries.
The multimeter is designed according to safety standards EN61010-1/ 61010-2-032 and electromagnetic compatibility EN61326-1/EN61326-2-2 and complies with CAT III 600V, double insulation and pollution level II.


Product parameters :

- measurement of AC/DC voltage, AC current, resistance, capacity and circuit continuity
- voltage and current frequency measurement on the auxiliary display
- non-contact electric field sensing (NCV)
- multi-segment backlit dual LCD display
- sound and optical alarm
- protection against voltage greater than 600V on all ranges
- automatic range switching
- accuracy is guaranteed within 5% to 100% of ranges
- built-in LED flashlight
- powered by two AAA 1.5V R03 batteries


Technical parameters :

To ensure measurement accuracy, the operating temperature should be in the range of 18°C - 28°C

1. AC current measurement (ranges/resolution/accuracy):

9.999A / 0.001A / 50Hz to 60Hz ±(2.5%+30)
99.99A / 0.01A / 50Hz to 60Hz ±(2.5%+5)
600.0A / 0.1A / 50Hz to 60Hz ±(2.5%+5)
- minimum identifiable current: 0.01A
- the frequency display when measuring AC current is normative if the current amplitude is ?1Arms at a frequency of 40Hz to 100Hz
- overload protection at 600 Arms


2. AC voltage measurement ( range / resolution / accuracy ):

9.999V / 0.001V / 40Hz to 400Hz ±(0.8%+3)
99.99V / 0.010V / 40Hz to 400Hz ±(0.8%+3)
600.0V / 0.1V / 40Hz to 400Hz ±(0.8%+3)
- the display of frequency on the auxiliary display when measuring AC voltage is normative if the input voltage has an amplitude ?5Vrms at a frequency of 40Hz to 1000Hz. At frequency above 400Hz accuracy is not specified.
- input impedance approx. 10MG?
- overload protection at 600Vrms
- minimum identifiable voltage 0.6V


3. DC voltage measurement ( range / resolution / accuracy ):

9.999V / 0.001V / ±(0.5%+3)
99.99V / 0.01V / ±(0.5%+3)
600V / 0.1V / ±(0.5%+3)
- input impedance approx. 10M?
- overload protection at 600Vrms
- minimum identifiable voltage 0.6V


4. Resistance measurement (ranges/resolution/accuracy):

999.9? / 0.1? / ±(0.8%+3)
9.999k? / 0.001k? / ±(0.8%+3)
99.99k? / 0.01k? / ±(0.8%+3)
999.9k? / 0.1k? / ±(0.8%+3)
6.000M? / 0.001M? / ±(1.5%+3)
- overload protection at 600 Vrms
- open circuit voltage approx. 1V


5. Capacity measurement (ranges/resolution/accuracy):

99.99nF / 0.01nF / ±(4.0%+10)
999.9nF / 0.1nF / ±(4.0%+10)
9.999nF / 0.001µF / ±(4.0%+5)
99.99µF / 0.01µF / ±(4.0%+5)
999.9µF / 0.1µF / ±(4.0%+5)
9.999mF / 0.001mF / ±(10.0%+10)
99.99mF / 0.1mF / ±(10.0%+10)
- overload protection at 600 Vrms


6. Checking the continuity of circuits:

- If the measured resistance is ?30?, the circuit is in good conduction condition, the buzzer will beep and the LED light will turn green. If the measured resistance is ?70? (open circuit), the buzzer will not make any sound and the LED will turn red. If the circuit resistance is between 30? and 70?, the condition is undefined.
- open circuit voltage about 3.0V
- overload protection at 600 Vrms


7. Non-contact electric field sensing (NCV):

- allows detecting live conductors acoustically using a buzzer and optically using an LED


Other parameters :

- pliers opening: 28mm
- measurement of maximum and minimum values: yes
- data retention (HOLD): yes
- low battery indication: yes, if the battery voltage is less than 2.4V, if the battery voltage is less than approx. 2.2V, the device cannot be turned on
- auto power off: yes, the multimeter will automatically power off if no button is pressed within 15 minutes. This feature can be disabled as needed.
- resistance to falling: yes, 1m
- electromagnetic compatibility: RF?1V/m overall accuracy = stated accuracy +5% of range, if RF>1V/m then accuracy not specified
- operating altitude: ?2000m
- operating temperature and humidity: 0 to +30°C (? 80%RH), 30 to 40°C (? 75%RH), 40 to 50°C (? 45%RH)
- storage temperature and humidity: -20 to +60°C (? 80%RH)
- recommended calibration interval: 1 year
- power supply: 2 batteries 1.5 V (R03)
- product dimensions: 201.5 × 47 × 28.5 mm
- weight UT202T: approx. 241g (including batteries);
- product color: red and gray


Package contents :

- clamp multimeter UT202T: 1 pc
- test cables: 1 pair
- battery 1.5 V (R03): 2 pcs
- instructions for use: 1 pc


Wholesale packing:

- standard quantity per carton: 40 pcs
- standard carton dimensions: 485 x 295 x 385 mm
- standard gross weight cardboard: approx. 17 kg


Manufacturer:
UNI-TREND
- www.uni-t.cz