Ispitivač napona beskontaktni, 12-1000V SB 255-1301, Wiha 44309

Osnovne značajke
Product description
Prior to the start of electrical installations, electricians must ensure that the work environment is voltage free.
A voltage tester is needed for testing alternating electrical fields or detecting potential error sources.
Thanks to its optical and acoustic signal, the...
499,00kn 66,23€
Dosegli ste maksimum raspoloživosti - 30

Jednokratno plaćanje:
  • Internet bankarstvo (virman)
  • Pouzećem - plaćanje gotovinom dostavljaču kod isporuke paketa
  • Maestro, MasterCard, Visa, Visa Premium
Obročno plaćanje:
  • MasterCard ZABA do 24 rate
  • Visa Premium do 10 rata
Ispitivač napona beskontaktni, 12-1000V SB 255-1301, Wiha 44309
499,00kn 66,23€
Opis
Product description

Prior to the start of electrical installations, electricians must ensure that the work environment is voltage free.
A voltage tester is needed for testing alternating electrical fields or detecting potential error sources.
Thanks to its optical and acoustic signal, the non-contact Wiha voltage tester indicates whether or not there is any voltage.
After switching on, the permanently green illuminated LED indicates readiness.
During the voltage test, depending on the strength of the electrical alternating field, the LEDs are illuminated from blue (weak), to orange, to red (strong).
Two AAA batteries are required for use, which are included in the scope of delivery.
If the device is not in use for 4 minutes, it switches off automatically to save energy.
An integrated LED flashlight allows illumination of the measurement site in the dark and can also be used as a flashlight by manually switching it on and off.
Thanks to its convenient size the voltage tester with push-on clip fits comfortably in any shirt or pant pocket.
With its internationally adjustable measuring tip, the voltage tester is suitable for all outlet variations around the world.
The single-pole voltage tester complies with the EN 61010-1 / IEC 61326 standard and is compatible with CAT IV 1,000 VAC.
Furthermore,the tool is approved according to the ATEX standard for use in explosive areas (category II).

Note
The device should be tested on a known voltage source before and after use to ensure its functionality.

Application
For the detection and localization of live conductors, cable interruptions and cable breaks, blown fuses, defective lamps on light strings, as well as detection of individual wires.

Technical details

Voltage V AC min – max 12 - 1000
Overall length (mm) 150
Battery 2x AAA batteries
Handle diameter 28,5
Remote voltage test Yes
ATEX approval Yes
Integrated flashlight Yes
Measuring category CAT IV 1,000 V
Protection class IP 67
Operating temperature -20 - 40°C
Acoustic signal Yes

Povezani artikli

Top