Ispitivač napona beskontaktni, 12 - 1000V SB 255-13, Wiha 43797

Osnovne značajke
Product description
Before starting electrical installation work, electricians need to guarantee that their work environment is free of any live voltage.
A voltage tester is required to test alternating electric fields or probable sources of error.
The contactless Wiha voltage tester will...
319,00kn 42,34€
Dosegli ste maksimum raspoloživosti - 29

Jednokratno plaćanje:
  • Internet bankarstvo (virman)
  • Pouzećem - plaćanje gotovinom dostavljaču kod isporuke paketa
  • Maestro, MasterCard, Visa, Visa Premium
Obročno plaćanje:
  • MasterCard ZABA do 24 rate
  • Visa Premium do 10 rata
Ispitivač napona beskontaktni, 12 - 1000V SB 255-13, Wiha 43797
319,00kn 42,34€
Opis
Product description

Before starting electrical installation work, electricians need to guarantee that their work environment is free of any live voltage.
A voltage tester is required to test alternating electric fields or probable sources of error.
The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal.
Once the tester is switched on, the permanently green LED indicates that the tester is ready for use.
During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field.
Two AAA batteries are required to operate the device. These are included in the delivery.
The device switches off automatically to save energy if it is not used for four minutes.
An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.
The voltage tester is suitable for all socket variants worldwide thanks to its measurement tip suited to international usage.
Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1/IEC 61326.
Note
The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly.

Application
Used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.

Technical details

Voltage V AC min – max 12 - 1000
Overall length (mm) 150
Battery 2x AAA batteries
Handle diameter 28,5
Remote voltage test Yes
ATEX approval No
Integrated flashlight Yes
Measuring category CAT IV 1,000 V
Protection class IP 67
Operating temperature -20 - 40°C
Acoustic signal Yes



Povezani artikli

Top