Daljinski za Rasperry Pi, modul

Opis

Description :
POWER HAS TO BE CONECTED TO THE MODULE !!
As everyone at some point will recognize the Raspberry Pi doesn't include any kind of shutdown button.
So the only way to power it off is by unplugging it from the power supply.
To make sure you get no corruption of your data files on the SD card you should shutdown
the Raspberry before powering it off.
So the whole procedure can be a bit annoying especially if you want to use the Raspberry as
some kind of embedded PC . e.g. a media server or an internet radio.

Features:
Power Button provides a small circuit that includes the features:
Sending a shutdown signal to the Raspberry if the Shutdown Button is pressed
Powering off the Raspberry after save shutdown
Powering on the Raspberry after the Button is pressed again
LED light indicating the current state: On / Shutdown / Off
Easy to set
Easy to setup
Dimension: 65mm x 30 mm x 20mm
Parameters:
Function BCM RPi
Disk Status21 Pin 40
Shut Down24 Pin 18
PWR Status26 Pin 37
GND N/A Pin 6/9/14/20/25/30/34/39
5V 5V Pin 2/4