Cytron maker pHAT, Raspberry kompatibilan

Osnovne značajke
  • Šifra proizvoda: 9150024916
106,00 kn u dućanu
100,70 kn
Dostava: 5 dana
Jednokratno plaćanje:
Internet bankarstvo (virman)
Pouzeće (prilikom preuzimanja)
American Express, Maestro, MasterCard, Visa
Obročno plaćanje:
MasterCard 2-12 rate
Visa Premium 2-10 rata
DOSTUPNOST PO POSLOVNICAMA:
ZAGREB - VUKOVARSKA, ZAGREB - ARENA, WEB SHOP
  • OPIS



    Features:

    Raspberry Pi Zero size, stack perfectly on to Pi Zero Series of SBC (Single Board Computer).
    Compatible with standard size Raspberry Pi 3B/3B+, medium size Raspberry Pi 3A+ and smaller size Raspberry Pi Zero/W/WH.
    Standard Raspberry Pi GPIO footprint.
    LED array for selected GPIO pins (GPIO 17, 18, 27, 22, 25, 12, 13, 19).
    3x on board programmable push buttons (GPIO 21, 19 and 20, need to configure as input pull up).
    On board active buzzer (GPIO 26).
    Proper label for all GPIOs, including SPI, UART, I2C, 5V, 3.3V, and GND.
    Utilize USB Micro-B socket for 5V input and USB to UART communication.
    USB serial facilitated by the CH340, Rev1.10 uses FT231X as the USB to UART
    Input voltage: USB 5V, from computer, power bank or standard USB adapter.

    Maker pHAT is compatible with:

    Raspberry Pi Zero V1.3 (will need to solder 2x20 header pin - NOT included
    Raspberry Pi Zero W (will need to solder 2x20 header pin - NOT included
    Raspberry Pi Zero WH (Ready for plug and use)
    Raspberry Pi 1 Model A+ (Will need 2x20 stacking header)
    Raspberry Pi 3 Model A+ (Will need 2x20 stacking header)
    Raspberry Pi 3 Model B (Will need 2x20 stacking header)
    Raspberry Pi 3 Model B+ (Will need 2x20 stacking header)