Arduino MKR1010 WIFI, ABX00023

Osnovne značajke
  • Šifra proizvoda: 9150036100
349,00 kn u dućanu
331,55 kn
Jamstvo: 12 mjeseci Dostava: 5 dana
Jednokratno plaćanje:
Internet bankarstvo (virman)
Pouzeće (prilikom preuzimanja)
American Express, Maestro, MasterCard, Visa
Obročno plaćanje:
MasterCard 2-12 rate
Visa Premium 2-10 rata
DOSTUPNOST PO POSLOVNICAMA:
SPLIT, WEB SHOP
  • Arduino

    Arduino je talijanska kompanija specijalizirana za elektroniku. Osnovana je 2005. godine u Italiji. Arduino je softverska i hardverska kompanija koja je posvećena kit elektronici. Također nudi i vlastiti programski jezik i veliku bazu znanja i uputa za izgradnju elektroničkih sustava. Chipoteka vam nudi veliki izbor kit elektronike marke Arduino koja je idealna za hobiste i učenje elektronike i elektroničkih programa.

    » PREGLED SVIH ARDUINO PROIZVODA

  • OPIS

    Want to add a WiFi interface to your devices? Get the MKR WIFI 1010.
    It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert.
    This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BLOX.

    T he MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX.
    This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module
    and its low power consumption.

    The board is composed of three main blocks:
    SAMD21 Cortex-M0+ 32bit Low Power ARM MCU;
    U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi; and
    ECC508 Crypto Authentication.

    The MKR WIFI 1010 includes 32-bit computational power, the usual rich set of I/O interfaces, and low power Wi-Fi with a
    Cryptochip for secure communication using SHA-256 encryption.
    Plus, it offers ease of use Arduino Software (IDE) for code development and programming.
    All of these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form.

    Its USB port can be used to supply power (5V) to the board.
    It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on battery power or an external 5 volt source,
    charging the Li-Po battery while running on external power.
    Switching from one source to the other is done automatically.

    Warning: Unlike most Arduino boards, the MKR WIFI 1010 runs at 3.3V.
    The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
    While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.

    Microcontroller SAMD21 Cortex-M0+ 32bit Low Power ARM MCU
    Board Power Supply (USB/VIN) 5V
    Supported Battery(*) Li-Po Single Cell, 3.7V, 700mAh Minimum
    Circuit Operating Voltage 3.3V
    Digital I/O Pins 8
    PWM Pins 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
    UART 1
    SPI 1
    I2C 1
    I2S 1
    Connectivity WiFi
    Analog Input Pins 7 (ADC 8/10/12 bit)
    Analog Output Pins 1 (DAC 10 bit)
    External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
    DC Current per I/O Pin 7 mA
    Flash Memory 256 KB
    SRAM 32 KB
    EEPROM No
    Clock Speed 32.768 kHz (RTC), 48 MHz
    LED_BUILTIN 6
    Full-Speed USB Device and Embedded Host Included
    LED_BUILTIN 6
    Length 61.5 mm
    Width 25 mm
    Weight 32 gr.