Motor 4,5Vdc sa reduktorom 180:1; 80rpm, Pololu 1594

Osnovne značajke
  • Šifra proizvoda: 8090007600
72,00 kn u dućanu
68,40 kn
Isporučivo: 1 dan
Jednokratno plaćanje:
Internet bankarstvo (virman)
American Express, MasterCard, VISA, Maestro
Obročno plaćanje:
American Express 2-10 rata
  • OPIS

    This compact, inexpensive, low-current gearmotor (brushed DC motor with a 180:1 reduction gearbox) is well suited for use in small robots.
    At 4.5 V, it has a free-run speed of 80 RPM and a stall torque of approximately 30 oz-in (however,
    the built-in safety clutch might start slipping before the stall torque is reached).
    The D-shaped output shaft has a diameter of 3 mm and works with the Pololu wheels and 3mm universal aluminum mounting hub.
    This gearbox output shaft is offset from but parallel to the motor shaft.


    This brushed DC gearmotor is very compact and weighs only 0.7 ounces (19.5 grams) — perfect for building a quick, miniature robot.
    The recommended operating voltage range for this motor is 3 to 6 V, though the gearmotor can start rotating at voltages as low as 0.6 V.
    At 4.5 V, the motor has a free-run current of 80 mA and a stall current of 800 mA; this relatively low current draw makes this a great match
    for our qik 2s9v1 dual serial motor controller and programmable Orangutan robot controllers.
    The stall current, torque, and rotation speed will approximately scale linearly with the motor voltage.
    The gearbox is protected by a built-in safety clutch that will typically slip before gear teeth can shear.

    Manufacturer POLOLU
    Motor type DC
    Motor type angular, with plastic gearbox
    Supply voltage 4.5V DC
    Transformation ratio 180:1
    Double sided shaft no
    Nominal rot. speed measured after gear 80rpm
    Torque max. 210mNm
    Operating current max. 800mA
    Operating current 80mA
    Shaft diameter 3mm
    Shaft surface D spring