Arduino Uno SMD Rev3, A000073

Osnovne značajke
  • Šifra proizvoda: 8201000073
209,00 kn u dućanu
198,55 kn
Jamstvo: 12 mjeseci Dostava: ne
  • Arduino

    Arduino je talijanska kompanija specijalizirana za elektroniku. Osnovana je 2005. godine u Italiji. Arduino je softverska i hardverska kompanija koja je posvećena kit elektronici. Također nudi i vlastiti programski jezik i veliku bazu znanja i uputa za izgradnju elektroničkih sustava. Chipoteka vam nudi veliki izbor kit elektronike marke Arduino koja je idealna za hobiste i učenje elektronike i elektroničkih programa.

  • OPIS

    The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328 (datasheet).
    It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator,
    a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller;
    simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

    The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip.

    Additional features coming with the R3 version are:

    ATmega16U2 instead 8U2 as USB-to-Serial converter.
    1.0 pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other new pins placed near to the RESET pin,
    the IOREF that allow the shields to adapt to the voltage provided from the board and the second one is a not connected pin, that is reserved for future purposes. stronger RESET circuit.

    "Uno" means "One" in Italian and is named to mark the upcoming release of Arduino 1.0.
    The Uno and version 1.0 will be the reference versions of Arduino, moving forward.
    The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform;
    for a comparison with previous versions, see theindex of Arduino boards.

    Technical Specifications

    Microcontroller ATmega328
    Operating Voltage 5V
    Supply Voltage (recommended) 7-12V
    Maximum supply voltage (not recommended) 20V
    Digital I/O Pins 14 (of which 6 provide PWM output)
    Analog Input Pins 6
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
    SRAM 2 KB (ATmega328)
    EEPROM 1 KB (ATmega328)
    Clock Speed 16 MHz