Analizator poluvodiča , Peak Atlas DCA Pro, DCA75

Osnovne značajke
  • Šifra proizvoda: 6030300108
1.175,00 kn u dućanu
1.116,25 kn
Jamstvo: 12 mjeseci Isporučivo: 1 dan
Jednokratno plaćanje:
Internet bankarstvo (virman)
American Express, MasterCard, VISA, Maestro
Obročno plaćanje:
American Express 2-10 rata
DOSTUPNOST PO POSLOVNICAMA:
ZAGREB - VUKOVARSKA, SPLIT, RIJEKA, OSIJEK, ZAGREB - ARENA, ZADAR, ŠIBENIK, PULA, WEB SHOP
  • Velleman

    Velleman je kompanija specijalizirana za elektroniku. Osnovana je 1975. godine u Belgiji. Velleman je renomirani proizvođač kit elektronike. Chipoteka vam nudi kablove, generatore funkcija, bušilice, prijemnike, kanalne predajnike, alarm simulatore, 3D pisače i pripadajuću dodatnu opremu marke Velleman.

  • OPIS

    The Peak Atlas DCA Pro has an advanced new design that features a graphics display,
    USB communications, PC software and an enhanced component identification library.

    Features

    stand-alone or with a PC
    automatic component type identification
    automatic pinout identification
    special feature identification such as protection diodes and resistor shunts
    bipolar transistors: gain and leakage current measurements, silicon and germanium detection
    gate threshold measurement for Enhancement Mode MOSFETs
    semiconductor forward voltage measurement for diodes, LEDs and
    transistor Base-Emitter junctions
    automatic and manual power-off

    tehnički podaci:

    - peak test current into short circuit: -5.5 mA to 5.5 mA
    peak test voltage across open circuit: -5.1 V to 5.1 V
    transistor:
    gain range (Hfe): 4 - 65 000
    gain accuracy: ± 3% ± 5 Hfe
    Vceo test voltage: 2.0 V - 3.0 V
    Vbe accuracy: -2% -20 mV to +2% + 20 mV
    VBE for Darlington (shunted): 0.95 V - 1.80 V (0.75 V - 1.80 V)
    base-emitter shunt threshold: 50 k? - 70 k?
    BJT collector test current: 2.45 mA - 2.55 mA
    BJT acceptable leakage: 0.7 mA
    MOSFET:
    gate threshold range: 0.1 V - 5.0 V
    threshold accuracy: -2% -20 mV to +2% +20 mV
    drain test current: 2.45 mA - 255 mA
    gate resistance: 8 k?
    depletion drain test current: 4.5 mA
    JFET drain-source test current: 0.5 mA - 5.5 mA
    SCR/Triac:
    gate test current: 4.5 mA
    load test current: 5.0 mA
    diode:
    test current: 5.0 mA
    voltage accuracy: -2% -20 mV to +2% +20 mV
    Vf for LED identification: 1.50 V - 4.00 V
    short circuit threshold: 10 ?
    battery:
    type: MN21 / L1028 / GP23A 12 V alkaline
    voltage range: 7.50 V - 12 V
    warning threshold: 8.25 V
    dimensions: 103 x 70 x 20 mm